VHoldR Contour HD Accessories - Mounts

A pack of 2 replacement adhesive bases for the Contour Rotating Flat Mount. These adhesive bases are designed for the newer (slightly larger) style rotating flat mount, however you can cut them down to suit the older style rotating flat mount.

Free shipping within Australia on orders over $99
In Stock

The Contour Rotating Flat Surface Mount is the ultimate in smart design and simplicity. This useful multi-purpose surface mount was developed to be easy to use, and give you the confidence that once locked, it will stay in place. Simply slip the camera onto the TRails, rotate the camera into position, push on the lock button, and you are good to go.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

Great for sports where you don't wear a helmet or if you don't want to stick a mount on your shiny new helmet. The camera can be rotated in the mount, just like the flat mount that comes standard with the ContourHD and Contour HD 1080p cameras. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The New Vented Helmet Mount has been given a serious upgrade in how the mount tightens and clamps down to your helmet. Find your mounting location, slide the straps through, and cinch them down. Slide your Contour HD on the rails and you are ready to go. You can now tilt the camera forward or back to find the best angle.. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Contour XL Handlebar Mount has a larger diameter closure than the original Contour Handlebar Mount, allowing you to mount it to bars from 15mm to 33mm in diameter. The XL Handlebar Mount features the twist lock angle adjustment system that makes it easier to set up the right camera angle. More Photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
No stock - this mount is being updated and won't be available until February

This powerful suction cup mount can be used to attach your Contour to your windshield or other flat (non-porous) surfaces. This mount makes it simple to turn, tilt, and rotate your camera 360⁰. More Photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

This Mount accessory slots easily into place on your Contour suction cup removing the rail system attachment. It allows you to have the 1/4 20 tripod thread on your suction cup which allows you to use it with the Contour waterproof housings.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
No Stock

The Contour Surfboard Mount is a highly adjustable mount that can be used on a variety of boards as well as kayaks, boats and other watersports toys. The Contour Surfboard Mount has 360 degrees of rotation and 180 degrees of tilt and is specifically designed to work with all Contour waterproof housings. The quick release clip on the bottom of the mount allows you to remove the mount when it's not in use and the base comes with strong 3M adhesive to attach to your board. More Contour surfboard mount photos...

Free shipping within Australia for orders over $99
In Stock

The Contour 360 helmet mount is an extremely versatile mount that can be used to get a wide variety of shots including sideways and reverse angle recording. The 3M adhesive base is compact and flexible to suit curved surfaces. The easy to use lever on the bottom securely holds the camera to the base and makes it easy to remove the mount when not in use. The end of the mounting rail has a raised clip to lock the camera in place when in use. More Contour 360 helmet mount photos...

Free shipping in Australia on orders over $99
No Stock

The Contour 360 Helmet Mount Base is a replacement base with 3M adhesive for the Contour 360 helmet mount. The pack includes one replacement plastic base with adhesive as well as a spare adhesive piece.

Free shipping within Australia on orders over $99
No Stock

The Contour Hat Mount is designed to mount any Contour camera to the side of a flexible material hat or other piece of clothing. The Contour Hat Mount is a two piece construction, with a backing piece that sits inside the hat and a center disc that pushes on the outside of the hat and clips in to the backing piece. The Contour Hat Mount is a great way to head mount your Contour camera when you aren't using a helmet. More Contour hat mount photos...

Free shipping within Australia on orders over $99
In Stock

The Universal Mount will fit the VHoldR Contour HD cameras and it has a 1/4" female thread on the bottom so that you can use your camera with mounts such the XXL Roll Bar Mount and the Power Suction Cup Mount. It is also a good alternative helmet mount when used in conjunction with 3M Dual Lock. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Contour Profile Mount was built to place the Contour 1080 or the GPS camera within millimeters of the surface that you apply it to. The low profile design enhances the already minute size of the Contour video camera's making the World's Smallest HD Camera even more compact. Its 3M base adheres best to flat surfaces but will conform to curves of helmets and fairings for a variety of applications. This mount is designed to be used on the right hand side of your helmet.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Contour Profile Mount was built to place the Contour 1080 or the GPS camera within millimeters of the surface that you apply it to. The low profile design enhances the already minute size of the Contour video camera's making the World's Smallest HD Camera even more compact. Its 3M base adheres best to flat surfaces but will conform to curves of helmets and fairings for a variety of applications. This mount is designed to be used on the Left hand side of your helmet.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In stock

The perfect Drift camera accessory for hand-held point of view camera footage. Compatible with any camera with a standard 1/4″ tripod thread. Compatible also with the Contour and GoPro when the relevant tripod adapters are used. This mount allows you to get that look back view with the user in the shot.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The ActionPro GoPro Adaptor is a handy little mount which allows you to connect our helmet camera to the GoPro range of mounts. This adaptor really opens up the mounting options for all the helmet cameras available here at Launch.

The ActionPro GoPro Adaptor was designed with the Drift Innovation action cameras in mind. The mount utilises a 1/4" threaded stud which screws into the base of the Drift camera range.

It can be used with the Contour1080p and Contour GPS via the Contour Universal Mount and the Waterproof Housing (Contour 1080p only). You can also mount the POV1.5 and POV.HD camera heads with the VIO Tripod Mount.

And of course, the ActionPro GoPro Adaptor will allow you to mount any camera which has a standard 1/4" female thread to mount via a GoPro mount.

The Contour Picatinny Mount allows you to mount your Contour camera to any tactical weapon with a standard MIL-STD-1913 Picatinny/Weaver rail. The Contour Picatinny Mount has a thumb screw on the bottom to ensure it doesn't come loose and is made from reinforced polymer to resist vibration, recoil forces and heat.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Headstrap Mount is that true multi-sport mount. The elastic headband is
easy to adjust via sliding buckle, and the T-Rail system allows you to quickly attach
your Contour camera. The mount is firm, and provides jiggle-free recording for all
of your helmet less activities.
+ Elastic Headband fits all head sizes and works over hats and beanies
+ Easy on and off with the T-Rail system

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Kite Hero Contour Line Mount is designed to make shooting photos & video while you ride a breeze. Utilising the Contour T-Rail system, the Kitehero Contour Line Mount system is easily configured & fits most 4 line kites. Combined with the Contour GPS Camera or Contour+ Camera, you can easily track your latitude/longitude, jump heights, & speed all while recording full 1080p HD video. The KiteHero Line Mount is designed for use with a Contour waterproof case.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Contour Chest Mount allows you to mount your Contour camera to your chest for a unique and immersive point of view. The Contour Chest mount is made up from three different mounts: the GoPro Chest Harness Mount which is highly adjustable to fit a wide variety of shapes and sizes; the Drift Mount Adaptor which allows you to connect to any GoPro mount via a 1/4" tripod thread; and the Contour Universal Mount which slides on to your Contour camera and has as a 1/4" female thread to connect to the Drift Mount Adaptor. For more info check out our Contour Chest Mount video.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock
On sale for $89. You save $19 (18%)!

The Roll Bar Mount is the latest addition to the Contour family. Co-developed by Contour and RAM, this mount was built specifically to attach your Contour to a multitude of round diameters. Using a double socket arm and ball design, it adjusts easily and simply by turning a central wing nut. It gives you almost infinite adjustment to achieve perfect shooting angles. The marine grade aluminum mount attaches securely and easily via a bonanza strap to round bars from 51mm - 76mm (2” to 3”) in diameter. The patented design also dampens shock and vibration to help you create smooth video, and extend the life of your Contour Camera.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Flex Strap Mount from Contour is a versatile mount that is designed for use across a multitude of sports and bar shapes. Strap it to the downtube of your bicycle or to the roll cage in your car. The soft flexible strap holds steady and dampens vibration to assure you get clear crisp HD video. Two strap sizes are provided that connect with the popular rotating mount, ensuring a secure fit to all angle needs.

+ Fits bars 20mm to 70mm

+ Comes with two strap sizes 9” long and a 5.25” short strap for smaller diameters

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

Finally, a super strong suction mount with a reliable camera mount! The suction cup mount has a lever for easy mounting and removal and will stick like glue to smooth, flat surfaces. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro). The camera mount is fully adjustable so that you can get the perfect angle.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The XXL Roll bar Mount is designed to fit large diameter bars such as roll bars and motorbike fork legs. It comes with a 2" and 2.5" hose clamp for attaching to the bar, however you can also use smaller and larger diameter clamps to suit your application. The XXL Roll Bar Mount has an adjustable camera mount so that you can dial in the correct position and angle. TThe 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

This 6" (15cm) long flexible steel rod can be used to get your helmet cam into all those weird spots you've been dreaming of. The Flex Mount has a standard 1/4" threaded male connector on one end and a 1/4" threaded female recepticle on the other end. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

This 12" (30cm) long flexible steel rod can be used to get your helmet cam into all those weird spots you've been dreaming of. The Flex Mount has a standard 1/4-20 threaded male connector on one end and a 1/4-20 threaded female recepticle on the other end. The 1/4" thread mount allows you to connect to any helmet camera that has a 1/4" female thread (Drift, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Flymount is a universal camera mount that can clamp onto anything that is between 20 and 40mm in thickness. Aimed at the new generation waterproof / shockproof cameras, the Flymount camera mount is intended for use in harsh outdoor environments. The Unique cradle mount system locks your camera into place preventing loss or damage. They are resistant to shock, salt and high levels of UV and weigh under 200 grams.

The Flymount now includes a mount adapter for the GoPro which clips directly onto the Gopro mounting clip.
The Flymount is also compatible with the following cameras when used with a tripod adapter specific for that camera;Contour, POV.HD

Cameras that have a 1/4 female tread as standard on the bottom such as the Drift Innovation cameras, are ready to be mounted directly to the fly mount.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

The Ultra Clamp is great for clamping the camera in odd spots and on round bars like roll cages. The clamp can be wound out to cater for mount points up to 40mm in width. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

Free Express Shipping on orders over $99

In Stock