VIO

XXL Roll Bar Mount - Vario Mount

ORTXBMVAR.jpg

The XXL Roll bar Mount is designed to fit large diameter bars such as roll bars and motorbike fork legs. It comes with a 2" and 2.5" hose clamp for attaching to the bar, however you can also use smaller and larger diameter clamps to suit your application. The XXL Roll Bar Mount has an adjustable camera mount so that you can dial in the correct position and angle. The Vario mount has elasticised velcro to hold the camera in place.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

AU$69.00

AA and AAA Fast Charger

AA-battery-charger.jpg

Recharge up to four AA or AAA Ni-Cd or Ni-MH batteries in 2 hours. The charger utilises Delta V voltage detection to charge batteries to their optimal level to ensure long life and the charge state can be monitored on the LCD screen. Comes with a 12V cigarette lighter adaptor for your car as well as the mains plugpack.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

AU$39.00

Powertech 4xAA Rechargeable Batteries

batteries AA2400mAh.jpg

Save money by using rechargeable batteries in your helmet camera. The packet has 4 x AA Powertech 2400mAh rechargeable batteries.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

AU$27.00

POV1.5 Wide Angle Red Head

red head.jpg

Replacement POV1.5 wide angle red head with attached cable. More photos...

FREE EXPRESS DELIVERY INCLUDED

AU$249.00

POV1 NARROW ANGLE HEAD

in
narrow angle lens.jpg

The Narrow Angle Head features a 4.5mm lens, capturing a narrower field of view at 70 degrees. This provides reduced peripheral action, but makes distant objects appear larger. So it's perfect for aviation, motorsport track and race days, or any application where you want to bring the subject closer. POV1.5 users will need a 1.5 metre cable to connect this camera to their recording unit. More photos...

FREE EXPRESS DELIVERY INCLUDED
No Stock Available

AU$219.00

POV1 Wide Angle Head

wide angle lens.jpg

The Wide Angle Head is available for customers who have the original narrow angle head that came out with the early POV1s. The 2.97mm wide angle head (110 degree field of view) comes standard with the POV.T and was the standard head for most POV1 camera kits. More Photos...

FREE EXPRESS DELIVERY INCLUDED

AU$219.00

1150 Pelican Case

1150 case.jpg

Launch Helmet Cams is an official dealer for Pelican Cases, the worlds toughest watertight cases. The 1150 case can be used to store your helmet camera gear and is the perfect size for the VIO POV range of cameras. All Pelican Cases are dust proof and crush proof and come with an unconditional lifetime guarantee. The case comes with "pick n pluck" foam for a customized fit of the contents. External dimensions for the 1150 are 23.2 x 19.2 x 11.1cm and the internal dimensions are 20.8 x 14.4 x 9.2cm. Contact us for other sizes. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

AU$99.00

0910 Pelican SD Card Case

0920 case.jpg

The perfect way to store your SD memory cards. The 0910 Pelican Hard Case takes 8 x SD cards or 16 x Mini SD cards and is made from tough polycarbonate resin. The case has a water resistant seal to ensure your cards are protected. The case also comes with a customisable spare liner. All Pelican Cases are dust proof and crush proof and come with an unconditional lifetime guarantee. Contact us for other sizes. Cards not included. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

AU$49.00

XXL Roll Bar Mount - 1/4" Thread

ORTXBM.jpg

The XXL Roll bar Mount is designed to fit large diameter bars such as roll bars and motorbike fork legs. It comes with a 2" and 2.5" hose clamp for attaching to the bar, however you can also use smaller and larger diameter clamps to suit your application. The XXL Roll Bar Mount has an adjustable camera mount so that you can dial in the correct position and angle. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Comp, Pro, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, VHoldR, GoPro).

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

AU$69.00

Power Suction Cup Mount

suction cup mount.jpg

Finally, a super strong suction mount with a reliable camera mount! The suction cup mount has a lever for easy mounting and removal and will stick like glue to smooth, flat surfaces. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Comp, Pro, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, VHoldR, GoPro). The camera mount is fully adjustable so that you can get the perfect angle.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

AU$69.00
Syndicate content