Drift

Powertech 4xAA Rechargeable Batteries

batteries AA2400mAh.jpg

Save money by using rechargeable batteries in your helmet camera. The packet has 4 x AA Powertech 2400mAh rechargeable batteries.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

AU$27.00

AA and AAA Fast Charger

AA-battery-charger.jpg

Recharge up to four AA or AAA Ni-Cd or Ni-MH batteries in 2 hours. The charger utilises Delta V voltage detection to charge batteries to their optimal level to ensure long life and the charge state can be monitored on the LCD screen. Comes with a 12V cigarette lighter adaptor for your car as well as the mains plugpack.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

AU$39.00

USB Wall Charger

ELUWC.jpg

Handy for charging any helmet camera (or other device) that charges via USB without needing to connect it to a computer. This USB Wall Charger comes with 4 different mains plugs so you can use it almost anywhere in the world.

These are also compatible with Iphone's and the latest generation of Ipod's

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

AU$29.00

USB Car Charger

usb-car-charger.jpg

This handy car charger can be used on any camera (or other device) that charges via USB.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In stock

AU$19.00

1150 Pelican Case

1150 case.jpg

Launch Helmet Cams is an official dealer for Pelican Cases, the worlds toughest watertight cases. The 1150 case can be used to store your helmet camera gear and is the perfect size for the VIO POV range of cameras. All Pelican Cases are dust proof and crush proof and come with an unconditional lifetime guarantee. The case comes with "pick n pluck" foam for a customized fit of the contents. External dimensions for the 1150 are 23.2 x 19.2 x 11.1cm and the internal dimensions are 20.8 x 14.4 x 9.2cm. Contact us for other sizes. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
No Stock

AU$99.00

1120 Pelican Hard Case

1120 case.jpg

Launch Helmet Cams is an official dealer for Pelican Cases, the worlds toughest watertight cases. The 1120 case can be used to store your helmet camera gear, or you can put your video camera in the case when using it with an analogue helmet camera to ensure it doesn't get damaged in a crash. All Pelican Cases are dust proof and crush proof and come with an unconditional lifetime guarantee. The case comes with "pick n pluck" foam for a customized fit of the contents. External dimensions for the 1120 are 20.6 x 16.7 x 9cm and the internal dimensions are 18.4 x 12.1 x 7.8cm. Contact us for other sizes. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

AU$89.00

0910 Pelican SD Card Case

0920 case.jpg

The perfect way to store your SD memory cards. The 0910 Pelican Hard Case takes 8 x SD cards or 16 x Mini SD cards and is made from tough polycarbonate resin. The case has a water resistant seal to ensure your cards are protected. The case also comes with a customisable spare liner. All Pelican Cases are dust proof and crush proof and come with an unconditional lifetime guarantee. Contact us for other sizes. Cards not included. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

AU$49.00

3M Dual Lock

3M Dual Lock.jpg

Run out of mounting strips for your Nukeproof Mount or just looking for an easy way to hang a cabinet? Look no further, we now have 3M Dual Lock available by the metre. Dual Lock works like velcro but it is super tough and wont let go like Velcro does. The 3M Dual Lock is single sided (not dual sided as shown in the photo). To purchase multiple metres just change the quantity in your shopping cart. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

AU$29.00

Ultra Clamp

Ultra Clamp.jpg

The Ultra Clamp is great for clamping the camera in odd spots and on round bars like roll cages. The clamp can be wound out to cater for mount points up to 40mm in width. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, ContourHD, GoPro).

Free Express Shipping on orders over $99

In Stock

AU$45.00

FLYMOUNT

Flymount2.jpg

The Flymount is a universal camera mount that can clamp onto anything that is between 20 and 40mm in thickness. Aimed at the new generation waterproof / shockproof cameras, the Flymount camera mount is intended for use in harsh outdoor environments. The Unique cradle mount system locks your camera into place preventing loss or damage. They are resistant to shock, salt and high levels of UV and weigh under 200 grams.

The Flymount now includes a mount adapter for the GoPro which clips directly onto the Gopro mounting clip.
The Flymount is also compatible with the following cameras when used with a tripod adapter specific for that camera;Contour, POV.HD

Cameras that have a 1/4 female tread as standard on the bottom such as the Drift Innovation cameras, are ready to be mounted directly to the fly mount.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99
In Stock

AU$95.00
Syndicate content