Analogue

The XXL Roll bar Mount is designed to fit large diameter bars such as roll bars and motorbike fork legs. It comes with a 2" and 2.5" hose clamp for attaching to the bar, however you can also use smaller and larger diameter clamps to suit your application. The XXL Roll Bar Mount has an adjustable camera mount so that you can dial in the correct position and angle. The Vario mount has elasticised velcro to hold the camera in place.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

Launch Helmet Cams is an official dealer for Pelican Cases, the worlds toughest watertight cases. The 1120 case can be used to store your helmet camera gear, or you can put your video camera in the case when using it with an analogue helmet camera to ensure it doesn't get damaged in a crash. All Pelican Cases are dust proof and crush proof and come with an unconditional lifetime guarantee. The case comes with "pick n pluck" foam for a customized fit of the contents. External dimensions for the 1120 are 20.6 x 16.7 x 9cm and the internal dimensions are 18.4 x 12.1 x 7.8cm. Contact us for other sizes. More photos...

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

The XXL Roll bar Mount is designed to fit large diameter bars such as roll bars and motorbike fork legs. It comes with a 2" and 2.5" hose clamp for attaching to the bar, however you can also use smaller and larger diameter clamps to suit your application. The XXL Roll Bar Mount has an adjustable camera mount so that you can dial in the correct position and angle. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Comp, Pro, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, VHoldR, GoPro).

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

Finally, a super strong suction mount with a reliable camera mount! The suction cup mount has a lever for easy mounting and removal and will stick like glue to smooth, flat surfaces. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Comp, Pro, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, VHoldR, GoPro). The camera mount is fully adjustable so that you can get the perfect angle.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

The universal mount provides a flexible mounting option that will suit most surfaces. The flexible rubber mount grips the helmet camera and it comes with a velcro mounting strip as well as a velcro strip for holding the cable in place.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

The goggle strap mount has been specially designed for snowboarding and skiing. Two velcro straps hold the mount firmly on your goggle strap and another strap hold the helmet camera in place. The mount is designed to be used in conjunction with the Wide Flange Base Mount or Universal Mount to ensure a steady shot in rough conditions.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

The Adjustable Goggle Strap Mount is the best way to mount the camera in the snow if you don't wear a helmet or it can be used for any sport where you wear goggles. The mount has strong velcro straps on the back to wrap around your goggle strap and two velcro loops on the front to hold the camera firmly in place. The camera mount can be rotated so that you can easily set-up the correct camera angle every time.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

We've searched high and low for a good headstrap mount - here is the result. The headstrap mount has an easily adjustable elastic strap and a strong mounting section for smooth video capture. Even better, the camera mount can be rotated 180 degrees in both directions so that you can set up the perfect angle for your camera.

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

This 12" (30cm) long flexible steel rod can be used to get your helmet cam into all those weird spots you've been dreaming of. The Flex Mount has a standard 1/4-20 threaded male connector on one end and a 1/4-20 threaded female recepticle on the other end. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Comp, Pro, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, VHoldR, GoPro).

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99

This 6" (15cm) long flexible steel rod can be used to get your helmet cam into all those weird spots you've been dreaming of. The Flex Mount has a standard 1/4" threaded male connector on one end and a 1/4" threaded female recepticle on the other end. The 1/4" thread mount allows you to connect to any camera that has a 1/4" female thread (Drift, Comp, Pro, Oregon) or that has a 1/4" tripod mount adaptor available (VIO, VHoldR, GoPro).

FREE EXPRESS DELIVERY INCLUDED ON ORDERS OVER $99